Drag Image To View In 360 Degrees

Click To Enlarge Image

Click To Enlarge Image

Product Description

Individually addressable RGBAW LED T-12 Light Tubes.

They come in 2’, 4’, and 8′ lengths (actual lengths, 2’= 29 3/8”, 4’= 47 ¾ “).

Profile for set up on high end lighting consoles is; Generic RGBAW 8 bit. This will match up Color tubes with the existing Color Picker/Color programs libraries and indexes.

Or can be used on conventional lighting/dimming consoles 5 channels per Tube; Ch#1 Red, Ch#2 Green, Ch#3 Blue, Ch#4 Amber, Ch#5 White.

Can be used worldwide, no converters needed.

Each Color tube requires a 120VAC – 220VAC power input, and Data signal via DMX Micro USB. Also for the First Color Tube in the Data run the Tube will require a 5 pin DMX to Micro USB connector. DMX signal can then be jumped via Micro USB jumper cables for Approximately 25 Color Tubes, however each tube Still requires 110VAC individually.

Frequently Asked Questions

Question: Why are tubes not reacting at all when introduced to DMX?

Answer: Start with unplugging and re-plugging the data stream to the tube. If this doesn’t work you may need to unplug both power and data, then re-plug with the power first and data second.

Question: Why are tubes reacting to data but freezing up after short periods of use?

Answer: You may need to slow the actual data speed being sent from the lighting console.